|
|
Post by enigmachrysalis on May 30, 2012 8:57:10 GMT -5
I'm rehabiing my HM and I wondered if the Kahler trems are can only be depressed or of mine was previously modified to prevent this. Does the stock setup allow for bends in both direction?
|
|
|
|
Post by monsta on May 30, 2012 16:46:12 GMT -5
You set the tension right on the springs in the back it'll float and give you up and down movement. You won't get the up range of an Ibanez because there's no scallop behind the trem.
|
|
|
|
Post by enigmachrysalis on May 30, 2012 17:18:55 GMT -5
That's what I thought. At first I was worried that the cavity route had been blocked, but guess the bridge may just be sitting too low / not tense enough!
|
|
|
|
Post by spacerocker on Jun 22, 2012 15:17:16 GMT -5
With the Spyder trem, when it is set correctly, the tremelo block looks like it is leaning forwards, by about 10 degrees!
|
|
/>