heem6 King of the Ignored
Guest
|
Post by heem6 King of the Ignored on Mar 2, 2010 0:40:22 GMT -5
If you are doing the HM contoured heel neckjoint on the guitar you're building (and it looked like you were in the CAD drawing) here's an HM Strat neckplate on eBay.
If it goes up over $12 you can just grab a Fender Deluxe neckplate...but the auction might be worth following.
|
|
|
|
Post by Bodaggit23 on Mar 2, 2010 2:16:55 GMT -5
Nice, but I have an extra neck plate. Thanks for thinking of me though! The HM heel looked goofy with the neck I'm using, so I modeled the heel off the LTD. It will look better once I put a contour on it. I had to remove a bunch of rounds from the edges while modeling the neck pocket. Rule #1: Do not add foo foo details until you're done modeling the important stuff. Changes made after such features, cause errors later.  Anyway, here's where I'm at:  |
|
|
|
Post by lbeast on Mar 2, 2010 22:21:12 GMT -5
Soldier on my good man!
To the Hunt!!!!!!!!!!!!!!!!!!!!!!!
|
|
|
|
Post by heem6 on Mar 7, 2010 22:59:30 GMT -5
I like that neck joint much better than that weird, square but sloping neck joint on many other ESP guitars! Good job.
|
|
|
|
Post by Bodaggit23 on Mar 8, 2010 1:27:21 GMT -5
Thanks guys!
I should have the parts machined by week end.
Then pre assembly, then polish if I ever get around to it.
|
|
